Common Garage Door Repair Issues and How to Fix Them

If you’re a homeowner, you’ve probably experienced a few common garage door repair issues that could be resolved with simple home fixes. This article will help you better understand some of these problems and how you can fix them yourself.

One of the most common repairs involves a broken spring. Springs are the heavy lifting that garage doors do, so they naturally wear down over time.

Broken Spring

A broken garage door spring can be one of the most frustrating and potentially dangerous problems. It can lead to a stuck door and vehicle, or even worse, if it breaks off unexpectedly.

The most obvious sign that a spring has broken is when it becomes difficult to open the garage door. This can happen with both torsion and extension springs.

You can check a torsion spring by examining the cables that run from the spring drum to the center of the door. If you see sagging or dangling cables, the tension in the torsion spring has been lost, and the cable cannot hold as tightly.

Damaged Rollers

Whether you have one roller broken or all of them are, damaged rollers can cause your garage door to be difficult to open or close. Replacing damaged rollers with the help of experts from a reputable company like Rainier Garage Door can help your garage door function properly and prevent future problems.

The rollers on your garage door are designed to work with the tracks and reduce friction during opening and closing. If they are not functioning correctly, you might hear a clicking sound or find your garage door squeaking and grinding during operation.

Luckily, garage door rollers are relatively easy to fix. The key is to identify the problem and replace the rollers with new ones that will function as they should.

Broken Tracks

Garage door tracks are crucial to the operation of your garage door. They can be very dangerous if they become misaligned, damaged or broken.

When one of the cables or cable drums that pull and support your garage door breaks, it will release much-unsupported weight onto your garage door tracks.

The weight can cause them to bend, so having a professional perform garage door repairs as soon as possible is a good idea.

You can usually straighten your horizontal garage door tracks with a claw hammer or similar tool if your horizontal garage door tracks are bent. However, hiring a professional to do this for you is best because it can be hazardous and cause serious injury or even death.

Unplugged Motor

Unplugging a motor is an easy way to damage it, but the good news is that most modern garage door openers have built-in safeguards. For example, you may have a safety switch that shuts off the motor when it senses the cord is disconnected.

A loose or damaged cable is one of the most common causes of an unplugged motor. Reattaching the cables by unscrewing them from the motor unit and resealing them with an adhesive is possible.

It’s also possible to fix the problem by re-wiring it with new cables. This is a more expensive option than replacing the entire unit, but it will be worth it in the long run. Getting a professional to inspect your wires from top to bottom is a great idea.

Dirty Photo Eyes

Photo eyes on your garage door are a safety feature that prevents it from closing when something interferes with the infrared beam it sends to the other sensor. This prevents injuries and damage to vehicles, people, or pets that could be in the door’s path when it closes.

They are mounted on each side of your garage door a few inches above the floor and must be aligned correctly to work properly. They are susceptible, and even small things can cause them to break the beam they send to the other sensor.

Inspect the photo eyes for dirt and debris that may have built up over time. Wipe them clean with a soft cloth and mild cleaner.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button